Friday, January 2, 2009

Transmission Oil Check Again

It was found perfectly levelled.

Tuesday, December 30, 2008

Transmission Oil & Brake Fluid Level Check

Mileage: 99750 KM

Checked level for both fluids and it seems fine. Lifted up passenger side and were able to get access to hole.

Tuesday, December 2, 2008

Lennox Furnace Maintenance


Cleaned up around blow motor and rerouted thermostat cable for avoiding interference.


Saturday, November 29, 2008

Engine Oil Change (98,500 KM)

Changed Engine Oil with oil Filter (Motor Master 17-1853-6) and checked level. It is fine.
Took a test spin and is fine as well.

Mileage: 98,500 KM

Tuesday, September 9, 2008

Maintenance of Pollen Filter and Air Filter Element




Mileage: 94500KM


Cleaned up air filter box including snow screen and replaced pollen filter(canadian tire micronair filter).




Saturday, August 30, 2008

Clean-up Pressure Bleeder


Used Isopropyl Alcohol (Shoppers Drug Mart) instead of Denatured Alcohol.


And top up brake fluid. Maybe leaking. Need to investigate.

Rear sides have no sign of leaking.



Brake Fluid Replacement

Mileage: 94,000 KM

Required tools: pressure bleeder pump, 11mm combination wrench

1. Place car on ramp and applied hand brake.

2. Extract brake fluid from reservoir as much as possible upto the bottom of strainer.

3. Bleed 100ml from clutch slave cylinder at 15 psi and close it and release pressure from pump
and apply clutch around 5 times fast enough and check if clutch is working properly.
If pedal stays at lower position making less travel distance, pull it back to upper normal
position by hand. Tried to maintain 15 psi while bleeding by bleeding slowly for laminar flow.

4. Close cap of the pump and pressurize the pump to 15 psi.

5. Bled brake calipers at 15psi in the following order.

Rear/Right (250ml)
Rear/Left (250ml)
Front/Right (250ml)
Front/Left (250ml)

6. Check brake function. If OK, reliefe pressure from pump and check fluid level.

7. Take test spin around.